Charging your Kai Robots

 

  1. Use the USB 4 to 1 charging cable that is included in your pack.
  2. Connect the Micro USB   end to each one of your robots, up to 4.
  3. Connect the USB Type A   end into a powered USB port. A 2A USB charger is recommended.
  4. With a 2A USB charger it takes around 1 hour to get +/- 80-90% charge with 4 robots connected.

Note: A full charge will last around four hours when idle.

  

 

During Charging

Both front LED eyes pulse light green

The back-battery level LED pulse green depending on the level of battery.

 

Fully Charged

Once the robot is fully charged, both front LED eyes blink bright purple and the back battery level will display 4 green LEDs. Also the Robot will beep every few seconds telling you that the battery is fully charged.

 

Note: Robots cannot be paired during charging.